Diamond Member Since 2014 
Audited Supplier
| Reference FOB Price: | US $10.00-12.00 / Piece |
|---|---|
| Min. Order: | 100 Pieces |
| Type: | Fiber Optic Isolator |
|---|---|
| Wiring Devices: | ODF |
| Certification: | ISO, RoHS |
1650nm fiber grating optical filter is the important components in the field of Optical communications link to detect. The principle is equivalent to a band-pass filter, which completely reflects light from 1643.5nm to 1656.5nm back (the return ratio is over 99.5%) and all other wavelengths of light pass through. Used in the field of communication can be separated communication light (C + L band) and detection of light, to prevent the detection of light through to the communication signal impaction, and can detect the return light at the control. All aspects of fiber grating indicators are stronger than the coating method.
Product Function:
1.Pass 1310+1550 nm and Stop 1650nm.
2.RoHS compliance
Technial parameter:
| Item | Parameters | Units | Minium | Typical | Maximum |
| 1 | Wavelength | nm | 1260-1625 | ||
| 2 | Reflective tape | nm | 1644.5-1655.5 | ||
| 3.1 | Insertion loss(1260nm-1360nm) | dB | 1.4 | ||
| 3.2 | Insertion loss(1460nm-1600nm) | dB | 1.4 | ||
| 3.3 | Insertion loss(1600nm-1625nm) | dB | 2 | ||
| 3.4 | Insertion loss(REFLECT BAND) | dB | 21 | ||
| 4.1 | Return loss(1260nm-1360nm) | dB | 35 | ||
| 4.2 | Return loss(1460nm-1580nm) | dB | 35 | ||
| 4.3 | Return loss(1580nm-1620nm) | dB | 30 | ||
| 4.4 | Return loss(1610nm-1620nm) | dB | 30 | ||
| 4.5 | Return loss(1620nm-1625nm) | dB | 20 | ||
| 4.6 | Return loss(REFLECT BAND) (Note 3) | dB | 0 | 1 | |
| 5 | Polarization-dependent loss(1260nm-1600nm) | dB | 0.4 | ||
| 6 | Jitter (REFLECT BAND) | dB | 0.6 | ||
| 7 | Optical power | dBM | 27 | ||
| 8 | Pluging No. | 500 | |||
| 9 | Connector Type | SC/APC Male & SC/APC Female | |||
Note:
(1) ORL(dB) = -10 log 10(Reflected Power/ Input Power) [dB];
(2) IL(dB) = -10 log 10(Output Power/ Input Power) [dB];
(3) To measure the Return Loss of reflect band, the light of 1650nm should be injected from the female side of reflector.
Operating temperature/moisture/storage:
NO | PAEAMETER | SPECIFICATION | UNITS | NOTE |
3.1 | Working temperature | -25~+65 | ºC | -- |
3.2 | Working temperature | 5~95 | %RH | -- |
3.3 | Storaging temperature | -40~+85 | ºC | -- |
3.4 | Storaging temperature | 5~95 | %RH | -- |
