FTTX Outdoor Waterproof Fiber Distribution Enclosures with 1X8 Steel Tube Sc/APC PLC Splitters

• Customization: Available
• Type: Optical Fiber Distribution Box
• Wiring Devices: Integrated Wiring
• Model NO.: PLC Splitters Enclosures
• Certification: ISO, RoHS
• Condition: New
• Connector Type: Odlc/Odc/Fullax/Odva/Mini Sc/Optitap
• Waterproof: IP68
• Ports: 12ports
• Temperature Range: -40~80ºC
• Fire Protection Rating: UL94-V0
• Transport Package: Carton Box
• Specification: 365x137x90mm(Without cover) 375x142x120mm(With cov
• Trademark: DYS/OEM
• Origin: China
• HS Code: 8517709000
• Production Capacity: 10000PCS/Day

Product Description

FTTX Outdoor Waterproof Fiber Distribution Enclosures with 1x8 Steel Tube SC/APC PLC Splitters


FTTX Enclosure is a new economic fiber distributed solution for outdoor use. Compare traditional products, FTTX Enclosure is
easy to operate and has high compatibility. It can be used for wall-mounting, aerial installation or holding pole installation, based on
different situation.FTTX Enclosure not only used in FTTH field, but also used in FTTAor other harsh environment.

1.FTTX Enclosure Application

FTTH field

Traditional solution use ONU or FDH (Optical Network Unit/Fiber Distribution Hub), when trunk optical cable arrives to outside
0of mansions and villas. FTTX Enclosure can replace ONU or FDH because it has fiber distribution function. Inside, it can be fixed
2-4pcs 1*8 or 1*16 PLC, and can be put 24pcs fiber splice protection sleeves. After mating with 1-48F IP67 preassembled waterproof
connector, FTTX Enclosure can connect each mansion and villa or low voltage silo directly. It can be fixed outside of mansions and
villas, or holding pole installation. FTTX Enclosure can reduce signal loss through less connecting node. For in factory preassembled
FTTX Enclosure, it's no need high skill operator because of no fiber splice operation. Installation efficiency can be increased by 40%.





FTTA field

Traditionally, Remote Radio Unit (RRU) and Building Base band Unit (BBU) connected by optical fiber cable, forme star
network topology. Each RRU need one duplex outdoor cable link to BBU. Installation will need more time and cost will be high.
FTTX Enclosure work as an Aggregation/Demark box, link RRU and BBU together. From BBU to FTTX Enclosure, only need
one multi-fiber hybrid cable. Then FTTX Enclosure divide fibers to each RRU through IP67 preassembled waterproof cable
assemblies. RRU can get power through assembled power connector on FTTX Enclosure.It can avoid needless duplication.


Trunk Cable Connecting

Trunk cable needs to be fusion welded frequently because of each drum cable length limited. So connecting point is weak and need
to be protected very well. When trunk cable comes into FTTX Enclosure, it will be sealed and fixed by torsion proof cable gland
(plastic or metal type). For 5mm-14mm out diameter cable,FTTX Enclosure has different accessories to fit. Torsion gland can release
stress when trunk cable bending and protect fiber avoid breaking. Inside of the FTTX Enclosure, main cable and strength member were
fixed by fastener, which make sure the box can stand 1200N pulling force long term. Splice protection sleeve (Max. 24pcs) and PLC
(Max.2pcs) can be fixed on the body, which make FTTX Enclosure fiber divided very easy. Anti-skid design on the base case, which
makes sure FTTX Enclosure holds wire/pole firmly.


Prospecting or Military Communication

The cable will be replayed frequently, when prospecting or military communication. Normal connector and cable cannot stand
frequently and high strength pulling and reuse. Inside of the FTTX Enclosure, armored cable and strength member were fixed by
fastener, which make sure the box can stand 1200N pulling force long term. It's very suitable for field use, especially in star network
communications. High strength material and arc interface design make sure FTTX Enclosure work abnormally when suffer shocks


2.Features and Benefits

*High compatibility: can be assembled ODVA, Hconn(OptiTap compatible), Mini SC, ODC, PTLC, PTMPO or power adapter.
*Factory-sealed or field assembly.
*Strong enough: working under 1200N pulling force long term.
*From 2 to 12 ports for single or multifiber harsh connectors.
*Available with PLC or splice sleeve for fiber divide .
*IP68 waterproof rating.
*Wall-mounting, aerial installation or holding pole installation.
* Decreased angle surface and height make sure no connector interfering when operating.
*Meet IEC 61753-1 standard.
*Cost effective: save 40% operating time.



3.Specification
 

Dimensions(LxWxH)	365x137x90mm(Without cover) 375x142x120mm(With cover)
Ingress protection	IP67
Temperature range	-40~80 ºC
Cable strength member	Armoured or Non-armoured
Cable type	Hybrid or non-hybrid
Round cable OD	5.0mm to 14.0mm
Flat cable dimension	4.6x8.9mm
Cable jacket material	LSZH,PE or TPU
Bending Radius	20D
Cable crush resistance	200N/cm long term
Tensile strength	1200N long term
UV resistance	ISO 4892-3
Fire protection rating	UL94-V0
Number of PLC	1 to 2pcs
Number of fusion protection steeve	1to 24pcs